Emergency Plumbing

Looking for Savings?

A family owned metro Denver plumbing company with over 18 years experience.

Lawn Sprinkler Pop-up Spray Heads

In all likelihood the most commonly utilized lawn sprinkler head – pop-ups are generally utilized for residential and modest commercial applications. Pop-up spray heads are developed to provide a constant stream of water – nozzles are made use of to distribute water in a variety of patterns to fit the contours of the landscape. Generally, spray heads are stationary and have no moving parts aside from the pop-up stem in the center of the irrigation head, making them affordable and simple to operate.

The body of pop-up heads vary in height from popup spray head2 inch to 20 inches. Two-inch pop-ups are normally used in situations where hard soil makes digging challenging. Four-inch pop-ups are commonly utilized in grass areas; the existing requirement for mowing height in lawn locations is generally 3 inches – a four-inch pop-up offers sufficient clearance for a growing yard and the fact that gradually heads tend to "sink" as soil and thatch build-up around the sprinkler head. 6 to twelve-inch pop-ups can be utilized to water groundcover, garden locations and shrub borders, these sprinkler heads can be installed on risers as the landscape grows and higher clearance is needed.

Pop-up spray heads are developed to be set up on a zone with plant material of similar watering requirements. Each zone is operated by an individual valve that is triggered by a solenoid. Pop-up spray heads are created to cover reasonably little areas with spray radius between 3 feet to 15 feet with an operating pressure in between 15 and 30 psi. The rainfall rate of repaired spray heads differs from 1.0 to 2.5 inches per hour and depends on the system pressure, spacing of the spray heads, maker specs, and nozzle size.

Manufacturers are constantly enhancing pop-ups. Functions such as matched rainfall rates, adjustable and low trajectory nozzles, nozzles with square spacing and strips, contribute to enhanced efficiency of the irrigation system. Numerous makers have actually even built nozzles that convert a pop-up spray head to a rotor efficient in covering distances varying from 8 feet to 30 feet. The advantage of these nozzles is that they minimize the rainfall rate, which enhances infiltration and minimizes run-off.